How to Reset Network Settings Back to Factory Defaults on the Lexmark S505, Pro200 and Pro700 Series AIOs

Document ID:HO3579
 
  Properties  

Problem

Cannot print; Print failure; Orange blinking light; New configuration; Reconfigured router; Moved printer; Replaced computer

Environment

How to restore network settings; Reset network card; Reset network adapter; Reset network INA; Restore wireless settings

Solution

Before You Begin


Use the Wireless Configuration Utility or Wireless Setup Assistant (Macintosh) to reset the network settings and reconfigure the printer only if all other diagnostic checks have been performed first. The use of these configuration utilities requires that the USB configuration cable be reconnected to the host computer.  

   

 

Procedure: Resetting the Network Settings

  1. From the home screen, press .
  2. Navigate to Network Setup and touch this option.
  3. Navigate to Reset Network Settings and touch this option.
  4. Touch Yes.
  5. Observe the message stating "Resetting Network Settings".
  6. To verify success, print a network setup page.  

 

NOTE: You will not be able to navigate the menu until this process is complete and the Wi-Fi light resets from    to  .   

 


Related Articles


Installation and Networking Table of Contents '08 & '09


Contacting Lexmark


If you need additional assistance, please contact Lexmark Technical Support. NOTE: When calling for support, you will need your machine/model type and serial number.
Please call from near the printer and the computer in case the technician on the phone asks you to perform a task involving these devices.

 



Link:
Please enter the email address you would like to send a copy of this page to.