How to Reset the Network Settings Back to the Factory Defaults on the 'Impact' S300 and 'Interpret' S400 Series All-in-Ones

Document ID:HO3578
 
  Properties  

Problem

Cannot print; Print failure; Orange blinking light; Moved printer; New configuration; Reconfigured router; Replaced computer

Environment

How to restore network settings; How to reset wireless settings; How to reset card

Solution

Before You Begin


Use the Wireless Configuration Utility or Wireless Setup Assistant (Macintosh) to reset the network settings and reconfigure the printer only if all other diagnostic checks have been performed first. The use of these configuration utilities requires that the USB configuration cable be reconnected to the host computer.     


Procedure:  Resetting the Network Settings 

  1. Press Setup ().
  2. Press the right-hand or left-hand arrow button until Network Setup displays, and then press .
  3. Press the right-hand or left-hand arrow button until Reset Network Adapter Defaults displays, and then press .
  4. Press the right-hand or left-hand arrow button to display Yes, and then press . 
  5. Observe the message stating "Clearing Wireless Settings".  
    NOTE: You will not be able to navigate the menu until this process is complete and the Wi-Fi light resets from   to  .   


Related Articles


Installation and Networking Table of Contents '09


Contacting Lexmark


If you need additional assistance, please contact Lexmark Technical Support. NOTE: When calling for support, you will need your machine/model type and serial number.
Please call from near the printer and the computer in case the technician on the phone asks you to perform a task involving these devices.


Link:
Please enter the email address you would like to send a copy of this page to.