Thank you for your feedback

How to Reset Network Settings Back to Factory Defaults on the Lexmark S505, Pro200 and Pro700 Series AIOs

Document ID:HO3577

Usergroup :External


Cannot print; Print failure; Orange blinking light; New configuration; Reconfigured router; Moved printer; Replaced computer


How to restore network settings; Reset network card; Reset network adapter; Reset network INA; Restore wireless settings


Before You Begin

Use the Wireless Configuration Utility or Wireless Setup Assistant (Macintosh) to reset the network settings and reconfigure the printer only if all other diagnostic checks have been performed first. The use of these configuration utilities requires that the USB configuration cable be reconnected to the host computer.     

Procedure: Resetting the Network Settings 

  1. Press Setup ().
  2. Press  three times until Network Setup displays, and then press .
  3. Press  once until Reset Network Adapter to Factory Defaults displays, and then press .
  4. The notification message will read, "This will reset all wireless network settings. Are you sure?" Press  for Yes, and then press .  
  5. Observe the message stating "Clearing Wireless Settings".  
    NOTE: You will not be able to navigate the menu until this process is complete and the Wi-Fi light resets from    to  .   

Related Articles

Installation and Networking Table of Contents '08 & '09

Contacting Lexmark

If you need additional assistance, please contact Lexmark Technical SupportNOTE: When calling for support, you will need your machine/model type and serial number.
Please call from near the printer and the computer in case the technician on the phone asks you to perform a task involving these devices.

Please enter the email address you would like to send a copy of this page to.