Thank you for your feedback



Physical Installation of MarkNet N8150, N8250, or N8350 Wireless Print Server

Document ID:HO3440
 
  Properties  

Problem

How to install the wireless card; Card installation; How to install the wireless print server; NIC installation; INA installation; Print adapters; Card set up; Network card install; Installation; Wireless NIC; Wi-Fi peripheral; Wireless option cards; INA; 802.11N; b/g/n card; Ethernet 802.11 b/g/n; 802.11g,b,n;

Solution

Overview


This document provides step-by-step instructions to successfully install any of the following MarkNet print servers: 

  • MarkNet N8150
  • MarkNet N8250
  • MarkNet N8350

 

Before you begin


Make sure that no held jobs are present in the print queue, then power OFF the device. Remove the left or right access door and then remove the metal shield, which is often held in place by a Phillips screw.

IMPORTANT: Failure to remove held jobs may result in a "57 Configuration change, some held jobs were not restored" message. Lost jobs will not be recoverable.

 

Wireless network adapter installation 


Step Action Illustration
1

Remove the option card from its package and confirm the shipped contents:

  • MarkNet N8150.11N b/g/n wireless print server
     
  • Card mounting bracket
     
  • Thumbscrew
2

If a hard drive is present on the printer, you will need to remove the existing hard drive from the device before proceeding. To do this:

a.  Remove the two outside screws from the back of the printer.
 
b.  Disconnect the existing hard drive cable from the system board.
 
c.  Remove the two thumbscrews from the anchor plate.

Note: If your printer does not contain a hard drive, you will still have to remove the two screws from the option card slot on the back of the printer.   

Click here for larger image.

3 Remove the hard drive. Observe the location of the three mounting posts and the corresponding mounting hole positions on the system board. 
4 Position and snap into place the included card mounting bracket.   

Click here for larger image.

5 Place the MarkNet N8150N onto the mounting bracket and secure this card with the included thumbscrew.  
6 Return the two original Phillips screws into place on the back of the printer.

Click here for larger image.

7

Connect the MarkNet N8150N's blue cable connector to the system board socket labeled INA.

Note: Some printers will not have this Internal Network Adapter label.

Click here for larger image.

8 If reinstalling the hard drive, align the hard drive mounting posts with the corresponding MarkNet card holes and snap the hard drive into place.

Click here for larger image.

9 Connect the hard drive cable connector to the blue socket on the MarkNet card labeled HDD.

Click here for larger image.

10
Replace all covers.
 
No Image

 

Compatibility


NOTE:
This list may not include all compatible products as Lexmark is continually adding support for wireless printing across all printer model lines.

MarkNet N8150 MarkNet N8250 MarkNet N8350
Lexmark X736de
Lexmark X738de
Lexmark X734de
Lexmark X738dte
Lexmark X656dte
Lexmark X658dte
Lexmark X656de
Lexmark X658de
Lexmark X658dme
Lexmark X658dfe
Lexmark X654de
Lexmark X658dtme
Lexmark X658dtfe
Lexmark X652de
Lexmark X651de
Lexmark X466de
Lexmark X464de
Lexmark X466dte
Lexmark X463de
Lexmark X864dhe
Lexmark X860de
Lexmark X862dte
Lexmark X860de
Lexmark X862dte
Lexmark X864dhe
Lexmark C734dn
Lexmark C736dn
Lexmark C736n
Lexmark C736dtn
Lexmark C734dtn
Lexmark C734n
Lexmark T654dn
Lexmark T652dn
Lexmark T650dn
Lexmark T654dtn
Lexmark T654n
Lexmark T652dtn
Lexmark T652n
Lexmark T650dtn
Lexmark T650n
Lexmark W850n
Lexmark W850dn
Lexmark T656dne
Lexmark X792de
Lexmark X792dte
Lexmark X925de
Lexmark X792dtfe
Lexmark X792dtme
Lexmark X792dtpe
Lexmark X792dtse
Lexmark X950de
Lexmark X952dte
Lexmark X954dhe
Lexmark X748de
Lexmark X925de
Lexmark X748dte
Lexmark X746de
Lexmark C792de
Lexmark C792dte
Lexmark C792e
Lexmark C792dhe
Lexmark C950de
Lexmark C748de
Lexmark C746dn
Lexmark C746dtn
Lexmark C748dte
Lexmark C746n
Lexmark C748e
Lexmark MX812de
Lexmark MX812dte
Lexmark MX812dxe
Lexmark MX812dfe
Lexmark MX812dpe
Lexmark MX812dtfe
Lexmark MX812dtpe
Lexmark MX812dxfe
Lexmark MX812dxpe
Lexmark MX812dme
Lexmark MX812dtme
Lexmark MX812dxme
Lexmark MX811de
Lexmark MX811dte
Lexmark MX811dxe
Lexmark MX811dfe
Lexmark MX811dpe
Lexmark MX811dme
Lexmark MX811dtfe
Lexmark MX811dtpe
Lexmark MX811dtme
Lexmark MX811dxfe
Lexmark MX811dxpe
Lexmark MX811dxme
Lexmark MX810de
Lexmark MX810dte
Lexmark MX810dxe
Lexmark MX810dfe
Lexmark MX810dpe
Lexmark MX810dme
Lexmark MX810dtfe
Lexmark MX810dtpe
Lexmark MX810dtme
Lexmark MX810dxfe
Lexmark MX810dxpe
Lexmark MX810dxme
Lexmark MX711de
Lexmark MX710de
Lexmark MX710dhe
Lexmark MX711dhe
Lexmark MX711dthe
Lexmark MS812de
Lexmark MS812dn
Lexmark MS810de
Lexmark MS811dn
Lexmark MS810dn
Lexmark MS812dtn
Lexmark MS810n
Lexmark MS811n
Lexmark MS810dtn
Lexmark MS811dtn
Lexmark MS711dn
Lexmark MS710dn
Lexmark MX611de
Lexmark MX511de
Lexmark MX611dhe
Lexmark MX610de
Lexmark MX511dhe
Lexmark MX510de
Lexmark MX511dte
Lexmark MX611dte

 

Still need help?
 

If you require additional assistance, please close this window, go to your product's support page and locate  Get In Touch with Lexmark! for contact information. NOTE: When calling for support, you will need your printer model/machine type and serial number (SN).

Please be near the products described in this article to expedite the support process and reduce call-back situations.

 



Link:
Please enter the email address you would like to send a copy of this page to.