Print
Email
Link
Back
How to Clear the X4900 Series AIO Network Settings and Restore the Factory Defaults |
Document ID:HO3416 |
| Properties |
Problem
Cannot print; Print failure; Orange blinking light; New configuration; Reconfigured router; Moved printer; Replaced computer
Environment
How to restore network settings; Reset network card; Reset network adapter; Reset network INA; Restore wireless settings
Solution
Before You Begin
Procedure: Resetting the Network Settings
Related Articles
Contacting Lexmark
Use the Wireless Configuration Utility or Wireless Setup Assistant (Macintosh) to reset the network settings and reconfigure the printer only if all other diagnostic checks have been performed first. Use of these configuration utilities requires the USB configuration cable to be reconnected to the host computer.
Procedure: Resetting the Network Settings
- Press Setup (
). - Press
twice until Network Setup is displayed, and then press 
. - Press
once until Reset Network Adapter to Factory Defaults is displayed, and then press . - The notification message will read, "This will reset all wireless network settings. Are you sure?" Press
for Yes, and then press . - Observe the message "Clearing Wireless Settings".
NOTE: You will not be able to navigate the menu until this process is complete and the Wi-Fi light resets from
to 
.
Related Articles
Installation and Networking Table of Contents '08
Contacting Lexmark
If you need additional assistance, please contact Lexmark Technical Support. NOTE: When calling for support, you will need your machine/model type and serial number.
Please call from near the printer and the computer in case the technician on the phone asks you to perform a task involving these devices.