Print
Email
Link
Back
How to Restore the Network Settings on the X4650 AIO to the Original Factory Defaults |
Document ID:HO3371 |
| Properties |
Problem
Cannot print; Cannot communicate; Network communication failure
Environment
How to reset the network settings; How to clear IP parameters;
How to restore the factory defaults; Lexmark X4610
How to restore the factory defaults; Lexmark X4610
Solution
Before You Begin
Procedure: Resetting the Network Settings
Related Articles
Contacting Lexmark
Reset the network settings and reconfigure the printer using the Wireless Configuration Utility or Wireless Setup Assistant (Macintosh) only if all other diagnostic checks have been performed first. Use of these configuration utilities requires the USB configuration cable to be reconnected to the host computer.
Procedure: Resetting the Network Settings
- Press Setup (
). - Press the right or left arrow button until Network Setup is displayed, and then press
. - Press the right or left arrow button until Reset Network Adapter Defaults is displayed, and then press.
- Press the right or left arrow button to display Yes, and then press.
- Observe the message "Clearing Wireless Settings".
NOTE: You will not be able to navigate the menu until this process is complete and the Wi-Fi light resets from
to orange (
).
Related Articles
Installation and Networking Table of Contents
Contacting Lexmark
If you need additional assistance, please contact Lexmark Technical Support. NOTE: When calling for support, you will need your machine/model type and serial number.
Please call from near the printer and the computer in case the technician on the phone asks you to perform a task involving these devices.