What you will see
The printer is displaying a 922 type Service Fuser error (for example, 922.01, 922.54, 922.99, etc.).
This type of error message indicates that the fuser unit inside the printer is operating below the proper temperature.
If this is the first time you have seen the error
1. Power the printer off.
2. Leave the printer powered off for 20 to 30 seconds.
3. Power the printer back on. If it comes up to the Ready state, try printing again.
• If the fuser error does not return, continue using the printer as normal but observe it closely over the next few days to see if the error returns.
• If the fuser error returns on power-up or if the error returns as soon as you try to print or at a later date, the printer will probably require service to correct the issue.
Before arranging service on the printer, please carry out the following checks:
• Ensure that the printer is connected to the correct power supply outlet. Check the Power Label on back of the printer to see whether it works on a 110 or 220 volt source. Verify that the power outlet matches its working voltage rating.
• If this is an intermittent error, make sure the printer is plugged directly into a wall outlet and not through a surge device or power strip. Power strips and uninterrupted power supplies can cause a low amperage problem to occur, which can trigger a false fuser error. This is true even if the printer has worked on this surge device in the past.
• Confirm that the printer is not exposed to cold air. For example, make sure the printer is not positioned in front of an air conditioner unit or directly in the path of an air vent where cold air can blow onto it. Make sure the temperature in the operating/office environment is above 60 F (16 C).
• If the error message is a 922.x4 error (where x can be any number), updating the printer's engine code may correct the issue. See the directions below.
How to update the printer's engine code (922.x4 errors only)
To check the printer's current engine code level, print out the menu settings pages. Click here for instructions.
Look for the header Device Information on one of the pages. Under Device Information, you will see Engine.
• If the engine code level is below E213 (for example, LS.ST.E209), updating the engine code to the most recent level may correct the fuser issue. Continue with step 4.
• If the engine code level is at E213 or E213a or higher, the printer will likely require service to correct the issue. Proceed in contacting Lexmark Technical SUpport.
NOTE: The key code listed here is correct as of November 2007. If it does not work, please contact Lexmark Technical Support for the correct key code.
IMPORTANT! Some files can be very large. Please allow plenty of time, possibly up to half an hour, for downloading files when using a slower Internet connection.
Save the file(s) to a directory or folder of your choice. IMPORTANT! Make a note of the location.
Once you have downloaded the file(s), unzip any .zip files to extract the necessary engine code files and instructions.
NOTE: If the downloaded files do not include any instructions, click the appropriate link below. If copying the engine code via:
• If the printer works correctly, continue using it but observe it closely over the next couple of days to see if the issue returns.
• If updating the engine code does not clear the error or if the error occurs again at a later date, the printer will likely require service to correct the issue. NOTE: The parts most likely to be causing this error are the fuser unit, the system board, or the low voltage power supply unit. These parts will need to be tested by a service technician and replaced as necessary.
Still need help?
Please contact Lexmark Technical Support if you need additional assistance. NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating these, click here.
Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.