Thank you for your feedback

EC4.1 Base(.P454) and Engine(.E511) Firmware 'Release Notes' and 'Firmware Availability' for the Lexmark MX610, MX611 and XM3150 (October 2014)

Document ID:RE196
06/30/14 Properties  


Firmware fixes



If your engine code firmware level is lower than FDN.PIR.E310, then perform this update to ensure a specific fix is implemented for a particular hardware component. This fix prolongs or extends the life of this component and it can potentially extend the life of the device. 

 Firmware release notes (October 2014)

Version and download file information

Firmware updates enhance the performance of existing features, add new features and/or address issues found on our product(s).

 Printer Download File & Filename(s) Latest Firmware Code Level
  • MX610
  • MX611
  • XM3150
This firmware is ONLY for MX610 & MX611 models with a 7" (177.8mm) operator panel.


  • LW41.SB.P454.blb70gr.FDN.PIR.E511.pirXXgre.fls
  • Lexmark_MX610de-MX611de-MX611dhe_P454_FWUpdate.exe

This executable (.exe) automates the firmware flash procedure and is compatible with Microsoft Windows. 

  • Printer Revision: LW41.SB7.P454
  • Engine Revision: FDN.PIR.E511

NOTE: Firmware updates may modify printer settings and cause counterfeit and/or unauthorized products, supplies, parts, and materials (such as toner and ink), software, or interfaces to stop working. Authorized use of genuine products will not be affected.


Article Contents


Firmware availability

Model Firmware file...
Base model


See update methods below for additional firmware update instructions.

Macintosh users

The .fls file will require the PrinterFileLoader application to send the file.

*DLE-equipped models
DLE*-equipped models:
  • Font or barcode
  • Prescribe
  • IPDS

Contact Lexmark Technical Support

*Downloadable language emulator





Current EC4.1 Release Notes (.P454)

Features and benefits

  • Added firmware support for AccuRead Automate App v.1.1. (7 &10" touch screen models only)
  • Improved robustness and performance of scan-related functions - especially concurrent workflow jobs
  • Improved memory management in specific low memory conditions
    Addressed Openssl CVE-2014-0224 SSL/TLS MITM vulnerability
  • Addressed the OpenSSL security issues CVE-2014-3511, CVE-2014-5139 & CVE-2014-3509
  • Changed name of Lexmark Mobile Direct to Direct Mobile Print
  • Updated pre-installed Scan to Network app to version 4.5.14. (touch screen models only)
  • Updated pre-installed Card Copy app to version 2.12.0. (7/10" touch screen models only)


Back to top

Release history

NOTE: Firmware revisions are cumulative so any information below is also applicable to the the latest firmware revisions listed above.

EC4.05 release notes

Base: LW40.SB7.P439

Addressed an issue that could lead to a 950.01 NVRAM Mismatch error when upgrading a device directly from EC0 firmware (initial start-of-production release) to EC4 (.P436) firmware

EC4 release notes

Base: LW40.SB7.P439

Functional Enhancements

  • Added AccuRead OCR as a licensed firmware option
  • Integrated OCR/MRC/Secure/PDF-A options into all device scan workflows
  • Added PDF A/1b capability
  • Increased Address Book & Internal Accounts entries from 250 to 750
  • Added Lexmark Mobile Direct support
  • Added a method to change halftone linearization tables to address some print quality issues
  • Made several enhancements in VCC (Configuration Files) support
  • Added ability to select multiple shortcuts in E-mail Shortcuts workflow
  • Improved Managed Print Services data tracking capabilities
  • Allow applications to support background processing to free the operator panel for concurrent functionality (eTask models only)
  • Updated pre-installed Forms and Favorites app to version 4.1.1 (for 7" & 10" op panels) and version 3.1.0 (for 4.3" op panels) (eTask models only)
  • Updated pre-installed Scan to Network app to version 4.3.15 (eTask models only)
  • Updated pre-installed Card Copy app to version 2.10.2 (eTask models only)
  • Updated pre-installed Multi Send app to version 2.6.2 (7" & 10" eTask models only)
  • Updated pre-installed My Shortcut app to version 1.5.7 (eTask models only)

Field Issues, Fixes and Other Improvements


  • Addressed the OpenSSL Security issue: TLS heartbeat read overrun (CVE-2014-0160)
  • Addressed an issue that could cause devices to drop off the network when waking from sleep mode
  • Allow user to continue to the Ready state when unsupported supplies are installed (but still does not allow user to print with unsupported supplies)
  • Made various user interface improvements on the operator panel/screen
  • Made minor enhancements to the EWS (embedded web server) interface
  • Addressed several issues that could lead to diverse 900.xx errors (e.g., 900.00, 900.12, 900.30, 900.36, 900.40, 900.43, 900.46, 900.70, 900.80 & & 900.81 errors)
  • Fixed some issues of devices not printing correct output with certain PCL5 & PCL-XL print jobs
  • Fixed some issues of devices printing incorrect output or error pages with certain PDF or Postscript print jobs
  • Addressed multiple translation issues
  • Addressed some SNMP inconsistencies
  • Improved memory management in specific low memory conditions
  • Addressed some minor issues with the Device Statistics page
  • Addressed some minor issues with the Job Accounting log
  • Addressed some issues that could lead to the device hanging intermittently
  • Addressed an issue that could lead to a hang when printing from USB thumbdrive
  • Fixed a minor tray linking issue
  • Made accessibility updates
  • Extended GARP/ARP Probe support
  • Fixed a wireless connection issue when using 802.1x and PEAP authentication
  • Enhanced support for OMNIKEY 5427 badge readers
  • Removed the "Enable Time to Hibernate" screen from the Initial Setup process
  • Changed default Hibernate setting from "Disabled" to "3 days" for certification purposes (Note that "Hibernate on Connection" default setting is still "Do Not Hibernate.")
  • Changed default Sleep timeout to 20 minutes (for certification purposes)
  • Made various eSF framework enhancements (eTask models only)
  • Made Solutions SDK enhancements (eTask models only)
  • Addressed minor text alignment issues with LDD scripts and eSF apps (eTask models only)
  • Allow fax footer to include "Print Time" or "Receive Time" of fax (based on an EWS setting)
  • Added multiple enhancements to aid in resolving customer fax issues
  • Addressed several fax-related issues
  • Addressed several FoIP (Fax over IP) issues
  • Fixed an issue in which a scan profile with MRC compression would use JPEG compression instead
  • Addressed an issue in which some Scan-to-Email default settings could change when choosing an email address from an LDAP server
  • Resolved some scan-related issues when using Image Capture
  • Addressed an issue that prevented EdgeErase function from working properly
  • Addressed an issue in which a Scan-to-FTP PDF file resulted in an "insufficient data for an image" when attempting to open the file
  • Improved the usability of the EWS shortcuts
  • Addressed an issue in which a user could not cancel a large scan-to job when using an app on a low-memory device
  • Added DisplayName attribute to LDAP support
  • Addressed an issue in which some 7" LCDs on older devices upgraded to P3xx firmware could see minor temporary flicker when coming out of sleep mode

Field Service related enhancements:

  • Made error logging improvements in device history pages and event log
  • Added support for GZIP Log link from EWS SE page on non-disk models
  • Corrected an issue in which the device page count could increment incorrectly when replacing system cards and then rebooting directly into the Diagnostics menu

Engine: FDN.PIR.E509 (Changes in Printer Engine Firmware since FDN.PIR.E412) 

Functional Enhancements

  • Added cartridge and imaging unit part numbers to the MPS data in order to aid MPS administrators when ordering replacement supplies
  • Unsupported supply algorithm updated

Field Issues and Fixes

  • Eliminate excessive pick attempts from Tray 1 on MS310/MS410/MX310/MX410 models when Tray 1 cannot link to another source
  • Added capability via diagnostic engine settings to disable advance start and smart runout for customers that experience excessive churn on EP system
  • Added capability via diagnostic engine settings to enable a double pick action from the multi-purpose feeder for customers experiencing paper skew from the MPF
  • Added capability via diagnostic engine settings to apply special darkness correction and halftone linearization tables for customers experiencing poor print quality on light gray scale images (requires RIP firmware P436 or later)


 Back to top

EC3 BASE: LW30.SB7.P329  

Specific to .P329 

  • Updated the built-in Scan To Network (Basic) app to Version 4.1.20 to improve MRC-compression functionality 
  • Addressed an issue that prevented cancellation of large scan-to jobs when using an app on a low-memory device
  • Addressed an issue where the MRC compression setting in apps does not override current MRC compression setting in the device 

Functional Enhancements (Added or Improved)

NOTE: .P328 modifications are included in .P329.

  1. Energy savings with Blue Angel (RAL-UZ171) and ENERGYSTAR V2.0 compliancy
  2. Windows Server 2012 support
  3. 802.1x EAP outer identity
  4. Made auto-reboot-after-900-error an auto continuable Intervention Request (IR)
  5. Setting to disable Tray Linking even when media type/media size matches
  6. Added MRC compression option for PDF output. (hard disk required)
  7. Added support for TIFF JPEG compression
  8. Made Active Directory auto configuration improvements
  9. Included U.S. English keyboard in touchscreen keyboard toggle selection for DBCS languages 
  10. Updated the versions of the pre-installed apps for eTask models: Scan to Network, Background and Idle Screen, Card Copy, Multisend (hard disk required)
  11. Fax support:
  • Created a Fax compatibility mode (reset basic fax settings)
  • Updated to latest Conexant patch for improved fax reliability
  • Fax ID to equal Fax Number
  • Separated Caller ID from other line monitoring features
  • Moved "Restore Fax settings to Factory Defaults" to User menu
  1. Service/Support/Diagnosis:
  • Simplified the UICC EEprom field update method by creating a single common flash file
  • Method to automatically capture log files to a USB flash drive upon device reboot
  • New link to Event Log Summary report via device's Reports menu
  1. Virtual Configuration Center (VCC):
  • Keys added for Toner level behavior, Raw print port, Hostname Resolution using DNS, Enable/disable disk encryption, and “SNMP Only” for supply alert options
  • Error messages are now returned by VCC Web Service.
  • Importation and exportation of VCC settings in Spanish
  • Change to allow VCC to set netapps passwords without error
  • New capability to Import / Export certificates via VCC *(Incompatible with earlier versions of firmware)


Field Issues, Fixes and Other Improvements


  1. Addressed several issues that could lead to diverse 900.xx errors, e.g., 900.00, 900.30, 900.32, 900.40, 900.43, 900.52, 900.57 & 900.77 errors
  2. Addressed an issue that could lead to a 976 Service Network Software error
  3. Removed references to false 31.00 errors from the event logs
  4. (FAX) Fixed false fax intervention request for 'line in wrong jack' message
  5. (FAX) Addressed an issue in which the "No analog line connected" message appears in spite of Line Features being disabled
  6. (FAX) Fixed JBIG2 being negotiated in error for driver to fax

Network/ Security

  1. Addressed an issue in which the device awakes from sleep if TCP port 9100 is opened
  2. Made change to allow first character of Hostname to be numeric
  3. Addressed connection delays associated with DNS lookup while using Active Directory
  4. Improved support for multi-domain Active Directory environments
  5. Improved wireless performance in weak signal environments
  6. Provided a 802.1x fix needed when authenticating with Windows Server 2008 or Windows Server 2012
  7. Improved Active Directory domain join process
  8. Improved error handling when using Kerberos
  9. Improved the Omnikey Reader 5427CK performance
  10. Added support for the Identive Cloud 2700 card reader
  11. Added function access controls for Fax or Held Fax Jobs via EWS
  12. Fixed network share discovery using net BIOS.
  13. Added SNMP OID for the Asset Tag setting

User Control

  1. Improved user interface for factory reset and wiping operations
  2. Made improvements to the "Wipe All" setting function
  3. Made various user interface improvements on the operator panel/screen
  4. Provided a fix for a condition that prevented locking 'originalMediaSize' for ScanUIPrompt
  5. Addressed an issue in which the icons on the touchscreen are inadvertently rearranged 
  6. Addressed multiple translation issues
  7. User enhancements made to the embedded Web server (EWS)
  8. Made change to show the percentage information when hovering with the mouse over supply level bars on the EWS
  9. Fixed an issue that caused the EWS to load slowly

Scan to (eSF App/Solutions, Copy, Email, PC, Fax, Network Folder)

  1. Fixed email (gmail) functionality that stops working when MFPUsage is configured
  2. Addressed a condition in which using the BadgeAuth eSF app could lead to a screen lock up
  3. Made interface changes to improve the efficiency of the Downtime Reports app
  4. Addressed an issue in which the device would hang temporarily when pressing the Logout button on the Document Workflow screen
  5. Fixed USDA (SNF) Scan to Home directory with Kerberos
  6. Fixed an issue where ComboPrompt does not display properly on LDSS Print app
  7. Provided a fix for Black rectangles showing on screen of LDD workflows
  8. Made various eSF framework enhancements
  9. Added JFIF header support to eSF image file support 
  10. Fixed an app (eSF) interface issue in which saved shortcut settings to overridden workflows were not getting displayed in the workflow screen
  11. Made improvements in LDAP addressbook lookup
  12. Provided a fix for Scan to Network Folder with Distributed File System (DFS) shares
  13. Addressed issue that could lead to faint thin artifacts at the bottom of copy output
  14. Addressed an issue leading to black edges appearing on edge to edge scans
  15. Added capability to Scan to Mac OSX guest share
  16. Added function access controls for Fax or Held Fax Jobs via EWS

Other Software/Device Functionality

  1. Corrected a minor fax job log issue
  2. Addressed various Job Accounting Log issues
  3. Fixed an issue causing printer jams on duplex letterhead job
  4. Addressed some issues that could lead to the device hanging intermittently
  5. The maximum sleep timeouts have been reduced to meet Blue Angel requirements
  6. Added targeted print performance improvements
  7. Fixed a Postscript error issue when trying to read AppSocket data with Remote Management set as Basic or Disabled
  8. Addressed some minor barcode bitmap font issues
  9. Addressed an issue in which the device with the FormsMerge DLE installed was randomly disabling the Forms Filter
  10. Fixed a “resetting the printer” hang when canceling a forms job (requires DLE installed)
  11. Provided a fix for slow printing in FMBC with OFIS+AS400 (requires DLE installed)


Engine: FDN.PIR.E412

Functional Enhancements

  1. Reduce power consumption while in sleep mode
  2. Slight throughput improvement when picking from Tray 3 or Tray 4
  3. Unsupported supply algorithm updated

Field Issues and Fixes

  1. This corrected an image placement error when printing on media much narrower than letter/A4; it is intermittently prevalent with paper sizes down to A6 media with as much as a 1.5mm shift to the right its intended placement.
  2. Improved toner usage estimation in the lightest print darkness settings
  3. Fix for narrow media algorithm during large batch jobs and very specific timings


 Back to top

NOTE: Firmware updates are cumulative, so items listed below are also addressed with the latest firmware available.

EC2.0 Base and EC3.2 Engine Release Notes (August 2013)

  • Printer Revision: LW20.SB7.P231
  • Engine Revision: FDN.PIR.E311
  • Network Revision: NW20.SB.N231 

Field Issues and Fixes

  • Extend life of bin full sensor on MX610 and MX611 devices by turning off the sensor LED during idle conditions when bin is not full.(.E311)
  • End-of-life output bin sensor behavior no longer results to a hard-stop of the printer; thus, allowing the machine to continue to operate. 


Back to top

EC2 Release Notes (May 2013)

Base: LW20.SB7.P231
Engine: FDN.PIR.E309 

  1. Added new 2013 Energy Savings requirements to lower power consumption
  2. Added UI Panel Off setting / Web setting when receiving jobs
  3. Added support for the Lexmark Secure Content Monitor application
  4. Added Address Book support with use of certain Solution's Apps
  5. Added object-based toner density
  6. Added ability to display extra license info on EWS
  7. Added walk-up ability to capture device debug logs
  8. Added ability for a WebApp to reset the Homescreen time-out timer
  9. Added ability to enable/disable EEE (Energy Efficient Ethernet)
  10. Added AirPrint Certification
  11. Improved paper jam workflow on various models (2.4" display)
  12. Improved Job Accounting
  13. Improved auditing of scan jobs
  14. Improved printing performance with certain jobs
  15. Improved compatibility with certain 3rd-party servers
  16. Improved compatibility for FoIP – Fax over IP
  17. Improved customer experience for 200.05/202.32 paper jams1Enabled ability to print from SharePoint
  18. Changes were made to allow Lexmark touchscreen MFPs to correctly display right-to-left and complex languages such as Hebrew, Arabic, and Thai.
  19. Changed messaging to instruct removal of the tray above the indicated options (tray, duplexer) jam source
  20. Changed behavior of fuser/maintenance kit to allow continuable stop with 80.3x message alerts
  21. 508 Op-Panel Magnification
  22. 508 color inversion on screen
  23. Enhanced Imaging Unit and Fuser Messaging on the Printer Menus Page and under the Device Stats Page via the Embedded Web Server
  24. Added MICR toner support (*.E309)
  25. Added calibration to allow broader electronics manufacturing tolerances (*.E309)
  26. Place sensors in low power mode sooner to reduce power and extend sensor life (*.E309)

Field Issues and Fixes

  • Various 900.xx, 976, and busy hang fixes
  • Various translation enhancements
  • Various security fixes
  • Various performance enhancements
  • Various Network and SNMP fixes
  • Improved accuracy of toner usage reporting under special case scenario (*.E309)
  • Image length from multi-purpose feeder is now consistent with other sources. Previously, MPF image was short by about 0.5 to 0.75mm (*.E309)

* Engine Code, AirPrint and the AirPrint Logo are trademarks of Apple Inc.


Back to top

EC1.1 Release Notes (March 2013)

Base: LW1.SB7.P133
Engine: FDN.PIR.E202 

Field Issues and Fixes

  • Intermittent crashes when using the wireless option card
  • Device may post inadvertent 31.40
  • Device crash when using downloaded Solution's apps.
  • Idle machine may exit sleep mode with an installed finisher option (*.E202)
  • Possible 111.50 printhead error while in sleep mode with an installed finisher option (*.E202)


Back to top

EC1 Release Notes (January 2013)

Base: LW1.SB7.P131

Functional Enhancements

  1. Added support for Web Services (Touch screen printer models only)
  2. Added support for Webkit (Server based solutions with touch screen printer models only)
  3. Added wireless setup wizard for devices equipped with the optional wireless Internal Network Adapters (INAs)
  4. Added Event Log summary report and Safe Mode setting (in Configuration menu)
  5. Added v7* upgrade
  6. New Non-Lexmark Return Program (NLRP) messaging for supplies that are not genuine Lexmark supplies
  7. Some changes for Common Criteria
  8. Copy quality enhancement
  9. Enhancement on wireless stability
  10. Reduced power consumption while in low power mode (E108)
  11. Safe Mode support in (Configuration Menu) (E108)
  12. Modified multi-purpose feeder pick algorithm to address skew issues with A6-size media from MPF (E108)
  13. Improved left margin starting point for pages originating from option trays (E108)
  14. Expanded context for auto-rebooting on critical errors (E108)

* Upgrade to Active Directory integration services.

Field Issues and Fixes

  • Various App robustness improvements
  • Various 900.xx, 976, system timeout, and busy hang fixes
  • Various translation enhancements
  • Various security fixes
  • Various performance enhancements
  • Various Network and SNMP fixes
  • Sleep button press improvement
  • Enhancement on wireless stability
  • Various strings & menus inconsistencies between webpage & operator panel fixes
  • Fix for 111.50 error if front cover is opened at a particular point in the boot sequence (from FDN.PIR.E079d)
  • Fix an issue where darkness correction may not be optimally applied after front cover is opened and closed (from FDN.PIR.E079d)
  • Fix for issue where darkness correction not applied properly for late-in-life imaging units (from FDN.PIR.E079f)
  • Fix potential issue for fan failing to start after opening/closing the printer front cover (affects MXx10 series and MS610de printer) (from FDN.PIR.E079h)
  • Allow resuming to full print speed after machine has cooled in idle mode following a throughput slow down due to narrow media printing (E108)
  • Load option tray prompt does not go away when loading option tray quickly while machine is in low power mode with a stapler option installed (E108)
  • Fix for invalid posting of 'load staples' while exiting low power mode (E108)

NOTE: The release notes above are representative of all printer models that share the same firmware code levels. Some features or capabilities may not be available on your printer.


Back to top

Firmware Update Recommendations

If you are experiencing an issue with the your product, or you would like to enhance your product's functionality.

Step 1: Check your printer's current code levels. See "How to Check Printer Firmware Levels" below if you are unfamiliar with this procedure.    

If your printer has ... (scenarios)
Printer firmware (Base) code ≤ LW40.\\.P439 and Engine code ≤ .E509
  1. Review Release Notes above to identify a fix or feature
  2. Eliminate the scenarios that follow. 
  3. Continue to Step 2.
The latest firmware installed; for example, firmware version under Device Information is already at the level specified in this article. Contact Lexmark Technical Support or search Knowledgebase.
A special version of firmware was installed to address a specific issue or add specific functionality.
  1. Again, reference the Release Notes for identification purposes.
  2. Proceed to Step 2 only if you know your fix or feature is included in this EC build.
  3. Contact Lexmark Technical Support if you cannot determine if your fix has been implemented in this new version of firmware.
An issue with a specific DLE-card function or other function not identified in this article...

DLE identification example

  1. Reference the Release Notes for identification purposes.
  2. Contact Lexmark Technical Support.
  3. Mention to the support representative the type of  DLE card and the problem that is fixed by this firmware release.
  4. Request an equivalent level of firmware compatible with your DLE option.


Step 2: Download and update printer firmware. See Firmware Availability above.

Step 3: After downloading and extracting the flash (.fls) files, select your update method below. 


Back to top

.FLS file update methods  

Make sure the printer is READY to receive firmware, and do not interrupt the printer's power or data connection during the update process.

Firmware Flash Methods (.fls file extensions) Information Recommended Use
Embedded Web Server (EWS Open your internet browser and enter the IP address of the printer. Select Settings > Update Firmware. You have network access to the printer's embedded Web server.
USB utility Click here for example. Seldom used, but a good alternative flash method for USB-attached printers
USB thumb drive Click here for example. A standalone printer  without computer access
FTP Click here for detailed steps. No HTTP (EWS) access and no access to a Microsoft Windows-based computer
MarkVision Professional or the latest MarkVision Enterprise Visit to download the latest User's Guide and perform a search on Print Server updates or Generic File downloads. Large printer fleets
Printer File Loader
Click here for detailed steps. Macintosh users


Back to top

How to Check Printer Firmware Levels 

To do this, obtain the Menu Settings page or access the printer's embedded web server (EWS) for this purpose. 

Checking firmware levels via Printer Menu's Setting page

1 Press the Menu button on the Operator Panel.
2 Touch Reports.
3 Touch Menu Settings Page to start printing.

Look for the code level under “Device Information”. 

Checking firmware levels via the printer's Embedded Web Server (EWS):

1 Launch your internet browser application.
2 After http://, enter the printer's IP address.

Click on Reports.

4 Click on Device Information.


Back to top

Contacting Lexmark 

If you require additional assistance, please close this window, go to your product's support page and locate Get In Touch with Lexmark! for contact information. NOTE: When calling for support, you will need your printer model/machine type and serial number (SN).

Please be near the products described in this article to expedite the support process and reduce callbacks.


Please enter the email address you would like to send a copy of this page to.