Thank you for your feedback



EC4.1 'Base = .P454, Engine = .E511' Firmware Release Notes and Firmware Availability for the Lexmark MS510, MS610, M1145, and M3150dn (October '14)

Document ID:RE194
 
06/18/14 Properties  

Problem

Firmware fixes

Solution

Firmware release notes (June 2014)

File name and version information

 Printer Download File & Filename(s) Latest Firmware Code Level
  • MS510dn
  • MS610dn
  • M1145
  • M3150dn
This firmware is for models equipped with a 2.4" (60.96mm) operator panel only.

Lexmark MS510-MS610.zip

  • LW41.PR.P454.pir24gr.FDN.PIR.E511.pirXXgre.fls
  • Lexmark_MS510-MS610_P454-FWUpdate.exe*
*This Windows utility automates the firmware flash procedure if an active network connection is available between client and printer.
  • Printer Revision: LW41.PR2.P454
  • Engine Revision: FDN.PIR.E511

Periodic printer firmware updates address end-user performance issues, provide new functionality, and provide performance improvements. 
Firmware updates may modify printer settings and cause counterfeit and/or unauthorized products, supplies, parts, materials (such as toners and inks), software, or interfaces to stop working. Authorized use of Genuine products will not be affected. 

 

Article Contents

 

 

 

Firmware availability

MarkVision Enterprise (MVE) users. An MVE firmware management issue has been identified that affects the ability to deploy printer firmware using MVE policies with this firmware release. 

MarkVision Enterprise 1.9 addresses this issue. Click here for an additional explanation and contact Lexmark Technical Support if you require additional assistance.
 

Model
Firmware file...
Base model with no installed DLEs



IMPORTANT! This firmware is for models with a 2.4" (60.96mm) LCD operator panel only.

MS510 and MS610dn users:


Lexmark MS510-MS610.zip
MS610de or M3150 users Click here for appropriate firmware for this printer model equipped with 4" (101.6mm) LCD operator panel.

If the .exe file is not useable in your OS environment, then see update methods below for additional firmware update instructions if you need to send the firmware.fls file to the printer. This is only necessary if you cannot utilize the automated firmware update utility (.exe) file.

Macintosh users

The .fls file will require the PrinterFileLoader application to send the file.

*DLE-equipped models.

DLE*-equipped models:

  • Font or barcode
  • Prescribe
  • IPDS

Contact Lexmark Technical Support

*Downloadable language emulator

 

Back to top


Current EC4.1 release notes

Features and benefits:

  • Improved memory management in specific low memory conditions
  • Addressed Openssl CVE-2014-0224 SSL/TLS MITM vulnerability
  • Addressed the OpenSSL security issues CVE-2014-3511, CVE-2014-5139 & CVE-2014-3509
  • Changed name of Lexmark Mobile Direct to Direct Mobile Print
     

Back to top


Release history

NOTE: Firmware updates are cumulative, so items listed below are also addressed with the latest firmware available.

EC4.05 release notes

Base: LW40.PR2.P436

Addressed an issue that could lead to a 950.01 NVRAM Mismatch error when upgrading a device directly from EC0 firmware (initial start-of-production release) to EC4 (.P436) firmware

EC4 (May 2014) 

Base: LW40.PR2.P436

Functional enhancements:

  • Increased Address Book & Internal Accounts entries from 250 to 750
  • Added Lexmark Mobile Direct support
  • Added a method to change halftone linearization tables to address some print quality issues
  • Made several enhancements in VCC (Configuration Files) support
  • Improved Managed Print Services data tracking capabilities

 

Field issues, fixes and other improvements:

  • Addressed the OpenSSL Security issue: TLS heartbeat read overrun (CVE-2014-0160)
  • Addressed an issue that could cause devices to drop off the network when waking from sleep mode
  • Allow user to continue to the Ready state when unsupported supplies are installed (but still does not allow user to print with unsupported supplies)
  • Made various user interface improvements on the operator panel/screen
  • Made minor enhancements to the EWS (embedded web server) interface
  • Addressed several issues that could lead to diverse 900.xx errors (e.g., 900.00, 900.12, 900.30, 900.36, 900.40, 900.43, 900.46 errors)
  • Fixed some issues of devices not printing correct output with certain PCL5 & PCL-XL print jobs
  • Fixed some issues of devices printing incorrect output or error pages with certain PDF or Postscript print jobs
  • Addressed multiple translation issues
  • Addressed some SNMP inconsistencies
  • Improved memory management in specific low memory conditions
  • Addressed some minor issues with the Device Statistics page
  • Addressed some minor issues with the Job Accounting log
  • Addressed some issues that could lead to the device hanging intermittently
  • Addressed an issue that could lead to a hang when printing from USB thumbdrive
  • Fixed a minor tray linking issue
  • Made accessibility updates
  • Extended GARP/ARP Probe support
  • Fixed a wireless connection issue when using 802.1x and PEAP authentication
  • Enhanced support for OMNIKEY 5427 badge readers
  • Removed the "Enable Time to Hibernate" screen from the Initial Setup process
  • Changed default Hibernate setting from "Disabled" to "3 days" for certification purposes. (Note that "Hibernate on Connection" default setting is still "Do Not Hibernate.")
  • Changed default Sleep timeout to 20 minutes (for certification purposes)

 

Field service related enhancements:

  • Made error logging improvements in device history pages and event log
  • Added support for GZIP Log link from EWS SE page on non-disk models
  • Corrected an issue in which the device page count could increment incorrectly when replacing system cards and then rebooting directly into the Diagnostics menu

Changes in Printer Engine Firmware since FDN.PIR.E412

Engine: FDN.PIR.E509

Functional enhancements:

  • Added cartridge and imaging unit part numbers to the MPS data, to aid MPS administrators when ordering replacement supplies.
  • Unsupported supply algorithm updated

Field issues and fixes:

  • Eliminate excessive pick attempts from Tray 1 on MS310/MS410/MX310/MX410 models when Tray 1 can not link to another source
  • Added capability via diagnostic engine settings to disable advance start and smart runout for customers that experience excessive churn on EP system
  • Added capability via diagnostic engine settings to enable a double pick action from the multi-purpose feeder for customers experiencing paper skew from the multipurpose feeder
  • Added capability via diagnostic engine settings to apply special darkness correction and halftone linearization tables for customers experiencing poor print quality on light gray scale images (requires RIP firmware P436 or later)

 

 

 


EC3 BASE: LW30.PR2.P328

Functional Enhancements (Added or Improved)

  1. Energy savings with Blue Angel (RAL-UZ171) and ENERGYSTAR V2.0 compliancy
  2. Windows Server 2012 support
  3. 802.1x EAP outer identity
  4. Made auto-reboot-after-900-error an auto continuable IR
  5. A user-selectable setting has been made available to disable Tray Linking even when media type/media size matches.
  1. Service/Support/Diagnosis:
  • Simplified the UICC EEprom field update method by creating a single common flash file
  • Method to automatically capture log files to a USB flash drive upon device reboot
  • Removed references to false 31.00 errors from the event logs
  • New link to Event Log Summary report via device's Reports menu
  1. Virtual Configuration Center (VCC)
  • Keys added:
    • Toner level behavior
    • Raw print port
    • Hostname Resolution using DNS
    • Enable/disable disk encryption
    • “SNMP Only” for supply alert options
  • Error messages are now returned by VCC Web Service.
  • Importation and exportation of VCC settings in Spanish
  • Change to allow VCC to set netapps passwords without error
  • New capability to Import / Export certificates via VCC *(Incompatible with earlier versions of firmware)

 

Field Issues, Fixes and Other Improvements

Errors

  1. Addressed several issues that could lead to diverse 900.xx errors; e.g., 900.00, 900.30, 900.32, 900.40, 900.43, 900.52, 900.57 & 900.77 errors
  2. Addressed an issue that could lead to a 976 Service Network Software error

 

Network/ Security

  1. Addressed an issue in which the device awakes from sleep if TCP port 9100 is opened
  2. Made change to allow first character of Hostname to be numeric
  3. Improved wireless performance in weak signal environments
  4. Provided a 802.1x fix needed when authenticating with Windows Server 2008 or Windows Server 2012
  5. Improved error handling when using Kerberos
  6. Improved the Omnikey Reader 5427CK performance
  7. Added support for the Identive CLoud 2700 card reader
  8. Added function access controls for Fax or Held Fax Jobs via EWS
  9. Fixed network share discovery using net BIOS.
  10. Added SNMP OID for the Asset Tag setting

User Control

  1. Improved user interface for factory reset and wiping operations
  2. Made improvements to the "Wipe All" setting function
  3. Made various user interface improvements on the operator panel/screen
  4. Addressed multiple translation issues
  5. User enhancements made to the embedded Web server (EWS)
  6. Made change to show the percentage information when hovering with the mouse over supply level bars on the EWS
  7. Fixed an issue that caused the EWS to load slowly
  8. Addressed an issue in which the icons on the touchscreen are inadvertently rearranged

Other Functionality

  1. Addressed various Job Accounting Log issues
  2. Fixed an issue causing printer jams on duplex letterhead job
  3. Addressed some issues that could lead to the device hanging intermittently
  4. The maximum sleep timeouts have been reduced to meet Blue Angel requirements
  5. Made interface changes to improve the efficiency of the Downtime Reports app
  6. Provided a fix for a condition that prevented locking 'originalMediaSize' for ScanUIPrompt
  7. Added targeted print performance improvements
  8. Fixed a Postscript error issue when trying to read AppSocket data with Remote Management set as Basic or Disabled
  9. Addressed some minor barcode bitmap font issues
  10. Added SNMP OID for the Asset Tag setting
  11. Addressed issue that led to MS51x devices reporting incorrect maintenance kit life values via MVE & Fleet Tracker.
  12. Addressed some minor barcode bitmap font issues
  13. Addressed an issue in which the device with the FormsMerge DLE installed was randomly disabling the Forms Filter
  14. Fixed a “resetting the printer” hang when canceling a forms job. (requires DLE installed)
  15. Provided a fix for slow printing in FMBC with OFIS+AS400 (Requires DLE installed)

 ENGINE: FDN.PIR.E412

Functional Enhancements:

  • Reduce energy consumption of the device when in sleep mode
  • Improvement in throughput performance when picking from Tray 3 or Tray 4
  • Unsupported supply algorithm updated

Field Issues and Fixes:

  • Corrected an image placement error when printing on media much narrower than letter/A4; worse case was A6 media, which was shifted by as much as 1.5mm to the right of the intended location
  • Improved toner usage estimation in the lightest print darkness settings
  • Fix for narrow media algorithm during large batch jobs and very specific timings

Back to top


EC2 Release Notes (May '13)


Functional Enhancements

  1. Added new 2013 Energy Savings requirements to lower power consumption
  2. Added UI Panel Off setting / Web setting when receiving jobs
  3. Added support for the Lexmark Secure Content Monitor application
  4. Added Address Book support with use of certain Solution's Apps
  5. Added object-based toner density
  6. Added ability to display extra license info on EWS
  7. Added walk-up ability to capture device debug logs
  8. Added ability for a WebApp to reset the Homescreen time-out timer
  9. Added ability to enable/disable EEE (Energy Efficient Ethernet)
  10. Added AirPrint Certification
  11. Improved paper jam workflow on various models (2.4" display)
  12. Improved Job Accounting
  13. Improved auditing of scan jobs
  14. Improved printing performance with certain jobs
  15. Improved compatibility with certain 3rd-party servers
  16. Improved customer experience for 200.05/202.32 paper jams
  17. Enabled ability to print from SharePoint
  18. Changes were made to allow Lexmark touchscreen MFPs to correctly display right-to-left and complex languages like Hebrew, Arabic, and Thai.
  19. Changed messaging to instruct removal of the tray above the indicated options(tray, duplexer) jam source
  20. Changed behavior of fuser/maintenance kit to allow continuable stop with 80.3x message alerts
  21. 508 Op-Panel magnification
  22. 508 color inversion on screen
  23. Enhanced Imaging Unit and Fuser Messaging on the Printer Menus Page and under the Device Stats Page via the Embedded Web Server
  24. Placed sensors in low power mode sooner to reduce power and extend sensor life (.E307)*
  25. Additional calibration to allow broader electronics manufacturing tolerances (.E307)

 * Engine code

AirPrint and the AirPrint Logo are trademarks of Apple Inc.

Field Issues and Fixes

  1. Various 900.xx, 976, and busy hang fixes
  2. Various translation enhancements
  3. Various security fixes
  4. Various performance enhancements
  5. Various Network and SNMP fixes
  6. Image length from multi-purpose feeder (MPF) is now consistent with other sources; previously, MPF image was short by about 0.5 to 0.75mm. (*.E307)

* Engine code

 Back to top


EC1.1 Release Notes (February 2013)

  • Printer Revision: LW1.PR.P151
  • Engine Revision: FDN.PIR.E201
  • Network Revision: NW1.CY.N151

Functional Enhancements

  1. Paper feed options now go to a low-power mode when the printer's primary motors go to an idle state, and before the printer enters sleep mode.
  2. Improved accuracy of the left-margin position when the Multi-purpose feeder (MPF) is used as the source tray, which also translates to improved output consistency of left margin between MPF and Tray 1.  

Field Issues and Fixes

  1. Fix for various 31.40 errors
  2. Fixed on various DLE issues
  3. Fixed printer crash when user flash files are write-protected
  4. Fixed various PPDS output issues
  5. Fixed various issues with low supply level messages
  6. Fixed Real Time Clock (RTC) - GreenMicro Version.
  7. Fixed various stability & reliability issues.
  8. Fixed on double output when printing from cloud
  9. Fixed issue that resulted in excess noise during power warm up cycle. (Main motor gear train)
     

 

EC1 Release Notes (January 2013)

Functional Enhancements

  1. Added Safe Mode setting (in Configuration menu)
  2. Added wireless setup wizard for devices equipped with the optional wireless internal network adapter
  3. Added Event Log summary report (in Configuration menu)
  4.  v7* upgrade
  5. New Non-Lexmark Return Program (NLRP) messaging for supplies that are not genuine Lexmark supplies
  6. Some changes for Common Criteria
  7. Enhancement on wireless stability
  8. Reduced power consumption while in low power mode (E108)
  9. Safe Mode support (E108)
  10. Modified multi-purpose feeder pick algorithm to address skew issues with A6-size media from MPF
  11. Improved left margin starting point for pages originating from option trays
  12. Expanded context for auto-rebooting on critical errors.

* Upgrade to Active Directory integration services. 

 

Field Issues and Fixes

  1. Various 900.xx, 976, system timeout, and busy hang fixes
  2. Various translation enhancements
  3. Various security fixes
  4. Various performance enhancements
  5. Various Network and SNMP fixes
  6. Various strings & menus inconsistencies between webpage & operator panel fixes
  7. (from FDN.PIR.E079d) Fix for 111.50 error if front cover is opened at a particular point in the boot sequence
  8. (from FDN.PIR.E079d) Fix an issue where darkness correction may not be optimally applied after front cover is opened and closed
  9. (from FDN.PIR.E079f) Fix for issue where darkness correction not applied properly for late-in-life imaging units
  10. (from FDN.PIR.E079h) Fix potential issue for fan failing to start after opening/closing the printer front cover (MS610de printer)
  11. Load option tray prompt does not go away when loading option tray quickly while machine is in low power mode with a stapler option installed.
  12. Fix for invalid posting of 'load staples' while exiting low power modeAllow resuming to full print speed after machine has cooled in idle mode following a throughput slow down due to narrow media printing

Back to top


Firmware Update Recommendations 

 

If you are experiencing an issue with the your product, or you would like to enhance your product's functionality.

Step 1: Check your printer's current code levels. See "How to Check Printer Firmware Levels" below if you are unfamiliar with this procedure.    

If your printer has ... (scenarios)
Then...
Printer firmware (Base) code ≤ LW40.\\.P439 and Engine code ≤ .E509
  1. Review Release Notes above to identify a fix or feature
  2. Eliminate the scenarios that follow. 
  3. Continue to Step 2.
The latest firmware installed; for example, firmware version under Device Information is already at the level specified in this article. Contact Lexmark Technical Support or search Knowledgebase.
A special version of firmware installed to address a specific issue or add specific functionality.
  1. Again, reference the Release Notes for identification purposes.
  2. Proceed to Step 2 only if you know your fix or feature is included in this EC build.
  3. Contact Lexmark Technical Support if you cannot determine if your fix has been implemented in this new version of firmware.
An issue with a specific DLE-card function or other function not identified in this article...

DLE identification example

  1. Reference the Release Notes for identification purposes.
  2. Contact Lexmark Technical Support.
  3. Mention to the support representative the type of  DLE card and the problem that is fixed by this firmware release.
  4. Request an equivalent level of firmware compatible with your DLE option.

 

Step 2: Download and update printer firmware. See Firmware Availability above.

Step 3: After downloading and extracting the flash (.fls) files, select your update method below. 

 

 

 Back to top


.FLS file update methods  

  

Make sure the printer is READY to receive firmware, and do not interrupt the printer's power or data connection during the update process. 

 

Firmware Flash Methods (.fls file extensions)
Information Recommended Use
Embedded Web Server (EWS Open your internet browser and enter the IP address of the printer. Select Settings > Update Firmware. You have network access to the printer's embedded Web server.
USB utility Click here for example. Seldom used, but a good alternative flash method for USB-attached printers
USB thumb drive Click here for example. A standalone printer  without computer access
FTP Click here for detailed steps. No HTTP (EWS) access and no access to a Microsoft Windows-based computer
MarkVision Professional or the latest MarkVision Enterprise Visit http://www.markvisionprofessional.com to download the latest User's Guide and perform a search on Print Server updates or Generic File downloads. Large printer fleets
Printer File Loader
(USB-Macintosh)
Click here for detailed steps. Macintosh users

 

 

 Back to top


How to Check Printer Firmware Levels 

 

Obtain the Menu Settings page or access the printer's embedded web server (EWS) for this purpose. 

To check firmware levels via printer's Menu's Setting page

1 Press the Menu button on the Operator Panel.
2 Touch Reports.
3 Touch Menu Settings Page to start printing.
4

Look for the code level under “Device Information”. 

To check firmware levels via the printer's embedded web server (EWS):

1 Launch your internet browser application.
2 After http://, enter the printer's IP address.
3

Click on Reports.

4 Click on Device Information.

 

 

 Back to top


Contact Lexmark 

If you require additional assistance, please close this window, go to your product's support page and locate Get In Touch with Lexmark! for contact information. NOTE: When calling for support, you will need your printer model/machine type and serial number (SN).

Please be near the products described in this article to expedite the support process and reduce callbacks.

 

 



Link:
Please enter the email address you would like to send a copy of this page to.