Thank you for your feedback



C74x / X74x — 925.05 Service Fan Stalled Error

Document ID:TE538
 
05/20/13 Properties  

Problem

925.05 Error message; Fan stall; Service fan problem; Can't print; Printer broken; Will not work; Printer doesn't work;

Solution

Overview


A 925.05 Fan Stall Error indicates that the MFP has registered a problem with one of the fan units not attaining operating speed. A service call may be required to resolve this issue. Certain rare occurrences, however, such as a power fluctuation or a static discharge in the vicinity of the device, can cause a false 925.05 Fan Stall Error message to appear. In such cases, the error is only temporary and can be easily resolved without service by updating the firmware to the most recent level.

 

 

Troubleshooting


The first thing to do when this error occurs is to flash the updated engine code to the printer; please refer to Technical Service Bulletin: TE493. At the time of writing, the latest engine code level is level E247.


NOTE: If your unable to perform the above steps or if issue persists after updating the code, please contact Lexmark Technical Support or a local authorized service provider. See 'Contacting Lexmark' below.

 

 

Contacting Lexmark


Please contact Lexmark Technical Support if you need additional assistance. NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating your printer's model type and serial numberclick here.

Please call from near the printer in case the technician on the phone asks you to perform a troubleshooting task on the printer. 

 

 

 



Link:
Please enter the email address you would like to send a copy of this page to.