Thank you for your feedback



Lexmark CX310, CX410, CX510, MX310, MX410, MX51x, MX61x, MX71x, & MX81x – Fax Setting to 'Not' Print Transmission Log Ignored when Sending Faxes from the Computer

Document ID:TE514
 
03/08/13 Properties  

Problem

Disabled fax transmission log; Sending faxes from PC; Print Transmission Log;

Solution

Overview
 

A fax transmission log prints when sending a fax from the computer even though you have disabled the printer's "Print Transmission Log" setting. Sending a fax from printer itself will not print the fax transmission logs.

 

Recommended Action
 

Users are recommended to update the firmware to the latest PE Release. See section below.

 

Firmware Update Steps
 

Step 1: Check Device Base Code Firmware Level

Obtain the MFP's current device firmware level. You may use either Options 1 or 2 below on ways to determine printer firmware code levels.

Option 1

Print the Menu Settings Page. Do this from the printer's operator panel:

Step Action
1 Press the Menu button on the Operator Panel.
2 Select Reports.
3

Print the Menu Settings Page.

Note: The printer should read ‘Printing Menu Settings Page’ and the menu settings page(s) should print out.

4 Check the code level under Device Information section on the menu settings pages.

Option 2

Access the printer's Embedded Web Server (EWS). Before you begin, a functional network installation (wired or wireless not a local USB installation) is required for access to the web server of any Lexmark network printer.

Step Action
1 Determine the IP address of the print server within the printer/MFP.
2 Launch your preferred web browser application (e.g., Firefox, Safari, Internet Explorer).
3 In the address field after the http://, enter the printer's IP address (e.g., http://192.168.1.5 or http://169.254.1.42).
4 Click on Reports.
5 To check for the code level, click on Device Information.

 

Step 2: Identify Fix Firmware for your MFP

Please contact your next level of support or Lexmark Technical Support to obtain the .P164 software code for the following models:

• CX310
• CX410
• CX510
• MX310
• MX410
• MX51x Series MFPs
• MX61x Series MFPs
• MX71x Series MFPs
• MX81x Series MFPs

IMPORTANT! This firmware was specifically created to address only the issues specified in this article. If your printer is not listed and is not experiencing the error, DO NOT update the firmware.

 

Step 3: DLE’s and Special Firmware

Certain functions or applications may require special firmware.

WARNING! Make this information known to the call center agent and do not attempt to update the MFP firmware if the format of firmware number differs greatly from what is seen in the table just viewed.

Any MFP with any one of these following downloadable language emulators (DLE) may require special firmware versions:

• Bar Code
• IPDS
• PrintCryption
• Forms
• Prescribe
• ImageQuick

 

Step 4: Need Help Updating Firmware?

After you have contacted Lexmark for this firmware, extract the .fls file to a known easy-to-find directory, and click here for an extensive list of the firmware update procedures.

NOTE: Follow any of the update procedures.

RECOMMENDATION: The printer's web page has an Update Firmware feature that is easy to use.

 

Still need help?


Please contact Lexmark Technical Support if you need additional assistance. NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN).

Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.

 



Link:
Please enter the email address you would like to send a copy of this page to.