Print
Email
Link
Back
Service Error 121.x2 Appears on a Lexmark MS71x, MX71x, MS81x, & MX81x Printer/MFP |
Document ID:TE504 |
| 01/30/13 | Properties |
Problem
Solution
What you will see
The printer posts a “Service Error [121.x2] Fuser Error”. This error usually appears should the fuser be removed while the power is still on, in order to clear a 20x.xx paper jam.
| Click Images to Enlarge | |
 |
 |
| A 20x.xx paper jam (screen capture image-left) can lead to a Service Error. 121.x2 Fuser Error (screen capture image-right) results if you remove the fuser to clear a paper jam while the power is still on. | |
Recommended solution
| Step | Action | |
| 1 |
Power off the printer.
|
|
| 2 |
Make sure the fuser is installed correctly by pushing it fully into place. Do this especially if it had been removed to clear a paper jam.
|
|
| 3 |
Tighten the fuser blue thumb screws by rotating them clockwise as shown below.
|
|
| 4 |
Power on the printer again.
|
|
| 5 |
If 121.x2 fuser error clears and the printer returns to Ready screen, then the problem is solved. Otherwise, contact Lexmark Technical Support to set up service for the printer.
|
Still need help?
Please contact Lexmark Technical Support if you need additional assistance. NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating these, click here.
Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.