Firmware Release Notes (May 2013)

File name and version 

 Periodic printer firmware updates address end-user performance issues, provide new functionality, and provide performance improvements.
 

Article Contents

• Firmware Availability
• Release Notes History
  • EC2 (May 2013)
  • EC1.1 (January 2013)
  • EC1 (November 2012)
• Update Recommendations
• .FLS file update methods

Firmware Availability
 

Firmware	Firmware Download File
Base model	Click here. See update methods below for additional firmware update instructions. Macintosh users The .fls file will require the PrinterFileLoader application to send the file.
DLE*- equipped models
Font or barcode card-equipped models	Contact Lexmark Technical Support
Prescribe card-equipped models
IPDS card-equipped models

 * Downloadable language emulator

Back to top

Release Note History

EC2 Release Notes (May '13)

1. Added new 2013 Energy Savings requirements to lower power consumption
2. Added UI Panel Off setting / Web setting when receiving jobs
3. Added support for the Lexmark Secure Content Monitor application
4. Added Address Book support with use of certain Solution's Apps
5. Added object-based toner density
6. Added ability to display extra license info on EWS
7. Added walk-up ability to capture device debug logs
8. Added ability for a WebApp to reset the Homescreen time-out timer
9. Added ability to enable/disable EEE (Energy Efficient Ethernet)
10. Added AirPrint Certification
11. Improved paper jam workflow on various models ( 2.4" display)
12. Improved Job Accounting
13. Improved auditing of scan jobs
14. Improved printing performance with certain jobs
15. Improved compatibility with certain 3rd-party servers
16. Improved compatibility for FoIP - Fax over IP
17. Improved customer experience for 200.05/202.32 paper jams
18. Enabled ability to print from SharePoint
19. Changes were made to allow Lexmark touchscreen MFPs to correctly display right-to-left and complex languages like Hebrew, Arabic and Thai
20. Changed messaging to instruct removal of the tray above the indicated options (tray, duplexer) jam source
21. Changed behavior of fuser/maintenance kit to allow continuable stop with 80.3x message alerts
22. 508 Op-Panel Magnification
23. 508 color inversion on screen
24. Enhanced Imaging Unit and Fuser Messaging on the Printer Menus Page and under the Device Stats Page via the Embedded Web Server
25. MICR toner support (.E410)*
26. Support for MX6500e MFP option (.E410)
27. Support for staple and hole-punch finisher option (.E410)
28. Added calibration to allow broader electronics manufacturing tolerances (.E410)
29. Enable a continuable stop for older fusers that were programmed for non-continuable stop (.E410)
30. Extended multi-feed flushing to duplex pages from multi-purpose feeder (introduced in FDN.DN.E305 for pages from trays) (.E410)
31. Addressed limited support for banner media (.E410)
32. Added additional sensor tests for diagnosis purposes (.E410)

* Engine

AirPrint and the AirPrint Logo are trademarks of Apple Inc.

Field Issues and Fixes

• Various 900.xx, 976, and busy hang fixes
• Various translation enhancements
• Various security fixes
• Various performance enhancements
• Various Network and SMTP fixes
• Fix for issue where the first few pels of first scan line on the page were absent or white (.E410)*
• Fix for a rare 912.44 error that occurred when a multi-feed is detected on the last page of a duplex staple job (.E410)
• Addressed false detection of media loaded when prompted to "Load Paper" in the multi-purpose feeder (.E410)
• Eliminated the potential for a misleading fan error when powering on the device without the fuser installed (.E410)
• Updated transfer voltages applied to duplex pages (.E410)

NOTE: Firmware updates are cumulative, so items listed below are also addressed with the latest firmware available.

EC1.1 Release Notes (January '13)

• Printer Revision: LW1.DN7.P153
  
• Engine Revision: FDN.DN.E305
  
• Network Revision: .N153a

Functional Enhancements

1. New intervention/message to warn customers when printing too many Vinyl Labels on MS81x models
         Error code for this new intervention is "10.xx".
2. New intervention/message when double-sheet feeds are detected and flushed to the output bin
         Error code for this new intervention is "24x.08".

An x denotes the tray number where the double-sheet feed took place. 

3. Enhanced the supply related email alerts by including the custom message (if one is defined) in the email
   
      Field Issues and Fixes

1. Fixed a bug where email alerts were not being sent out for the Nearly Low and Replace levels on supplies (e.g., Cartridge)
2. Fixed a bug where an installed font card was not reported correctly on the Menu Settings Page report
3. Fixed a PPDS bug for when printing on certain paper sizes
4. Fixed a bug (crash) when password protecting a user flash option card
5. Fixed a bug with Wipe All Settings
6. Fixed 3 bugs with the Solutions Framework  (touch screen models only)

EC1 Release Notes (Nov '12)

LW1.DN7.P125, FDN.DN.E215, NW1.YS.N125

Functional Enhancements

1. Added support for Web Services
2. Added support for WebKit (Server based solutions applies to touch screen models only)
3. Added Event Log summary report (Configuration menu)
4. Added Safe Mode setting (Configuration menu)
5. Added wireless setup wizard for devices equipped with the optional wireless internal network adapter.
6. v7* upgrade
7. New Non-Lexmark Return Program (NLRP) messaging for supplies that are not genuine Lexmark supplies.
8. Added Clip mode for A4 Fuser setting (Configuration menu)
9. Added additional Roller Kit** messaging
10. Added Stapler Test (in Finishing menu)

* Upgrade to Active Directory integration services.

**Users that have recently installed fuser-only kits will now receive a preventative maintenance message to replace the Roller Kit after a certain number of pages.

Field Issues and Fixes

1. Various 900.xx, 976, and busy hang fixes
2. Various translation enhancements
3. Various security fixes
4. Various performance enhancements
5. Various Network and SNMP fixes
6. Sleep button press improvement

A
Back to top

Firmware Update Recommendations

Step 1: Check your printer's current code levels. See "How to Check Printer Firmware Levels" below if you are unfamiliar with this procedure.  

Step 2: Download and update printer firmware. See Firmware Availability above.

After downloading and extracting the files, update the device using the Windows automated flash file (.exe) or select your flash (.fls) update method below.

Back to top

.FLS file update methods  

Make sure the printer is READY to receive firmware, and do not interrupt the printer's power or data connection during the update process. 

Back to top

How to Check Printer Firmware Levels

To do this, obtain the Menu Settings page or access the printer's embedded web server (EWS) for this purpose. 

Checking firmware levels via Printer Menu's Setting page: 

Checking firmware levels via the printer's embedded web server (EWS):

 Back to top

Contact Lexmark

Please contact Lexmark Technical Support for additional assistance. NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN).

Please call from near the computer and printer for over-the-phone diagnostic purposes.