Lexmark MS310, MS410, MS510, MS610, MX310, MX410, MX510, MX510, MX610, & MX611 Printer/MFP – Front Access Door Is Difficult to Close when Pushed from the Left Side

Document ID:FA908
 
01/03/13 Properties  

Problem

Door will not close; Difficult to close; Not fully closed; Close Front Door message; Front door proper closing; How to shut the front door; Stuck; Jammed door; Defective door

Solution

Overview
 

The printer's front access door may not close completely if pushed only from the left side (see sample below). If this is the case, the printer will not go into Ready mode.

Click Image to Enlarge
Notice the difference in the gap on the left and right-hand sides of the front door cover if it is not closed completely.

 

Recommendation
 

The front door should be closed by pushing on both the left and the right-hand sides of the door at the same time, or on its center, as shown in the images below.

Click Image to Enlarge

 

Still need help?
 

Please contact Lexmark Technical Support if you need additional assistance. NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN). If you need help locating these, click here.

Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.

 



Link:
Please enter the email address you would like to send a copy of this page to.