Thank you for your feedback



How to Update the Printer Firmware Using the Firmware Update Utility

Document ID:SO6307

Usergroup :External
  Languages  
06/13/16 Properties  

Problem

Update Lexmark firmware; Inkjet; Laser; MFPs; SFPs; Multifunction ; Single function Mono; Monochrome; Color

Solution

Overview
 

Firmware Update Utility (FUU) is one of the methods used to update the printer firmware. This can be performed via any of the following connection types; local (USB), ethernet, or wireless.

IMPORTANT! Firmware update is essential to optimize the printer’s performance. However, this procedure should only be performed when Lexmark Technical Support has recommended a firmware update. Recommendations will be made by a technician if a printer function or printing anomaly is known to be corrected by updating the printer firmware. 

 

Before you begin
 

Do the following before updating printer firmware:

  • Make sure that printer is in a “READY” state, and no error codes or messages are displayed on the printer screen.
  • Double check for any option cards installed on the printer; should the printer have an option card installed, please check whether there is an updated firmware version for the said option card and make use of that instead. 

WARNING! Do not update code if you are unsure about the presence of special code or code that is specific to a Downloadable Language Emulator (DLE). For more information, contact Lexmark Technical Support.

 

How to download the latest Printer Firmware
 

Click here for steps on how to download the latest printer firmware.

 

Procedure
 

Follow the steps below to update the printer firmware:

Step  Action Click Image to Enlarge
 1 Run the Firmware Update Utility and click Continue.
 2

Read through the License Agreement and click Agree to continue.

Note: Click on Disagree if you do not want to proceed.

  
 3

The Utility should display the printer(s) connected. Choose the printer you want to update and click Continue.

Note: If you know the printer's IP Address, you may enter it manually via the "Add Printer by IP Address" button.

  
 4

As soon as the update starts, a progress bar will display on the computer and your printer panel should show “Updating Firmware”.

Warning! Do not turn the printer off until the update is complete.

  
 5

When the update is completed, the utility will post “Firmware Update Summary” and the printer should power off and restart automatically.

Note: Click “Retry” if the update failed and needs to be performed again. Click “Close” if the update was successful.

  

 

Related Article
 

Firmware Flash or Code Update Table of the Contents and Guide

 

Still Need Help?
 

Please contact Lexmark Technical Support if you need additional assistance. NOTE: When calling for support, you will be asked for your machine/model type and serial number (SN).

Please call from near the printer in case the technician on the phone asks you to perform a task involving the printer.

 



Link:
Please enter the email address you would like to send a copy of this page to.